Safe Operation Rules When Edging Metal Pails

Safe operation rules when edging Metal Pails

After the iron barrel is welded, it will be flanged, corrugated, ribbed and crimped. (Metal Pails manufacturer) The thickness of the barrel body welded without edging is twice the normal thickness at the welding seam. Multi-layer hemming will cause a lot of material accumulation at the weld, which cannot meet the requirements of normal hemming. This area is called the seam triangle, and it's an eventful area. Since there are more materials than other crimping parts, it is difficult to adapt to the groove shape of the crimping roller, so iron tongues often appear, gaps appear on both sides of the seam weld, and leakage in the triangle area occurs. This is a more serious problem with the quality of the iron barrels. Therefore, in order to obtain a thickness similar to other parts of the iron barrel, edging is one of the more direct methods, because the edge of the welding seam is edging, and the thickness is thinner than other parts. After that, the thickness of the weld will be significantly reduced. Therefore, in order to obtain a thickness similar to that of other parts at the welding seam, edging is the most direct method, because the thickness of the welding seam is thinner than other parts through edging. After that, the thickness of the weld will be significantly reduced.

Safe operation rules when edging iron buckets

1. Check the equipment before starting work, it must be in normal condition.

2. Operators must wear gloves and masks or dust-proof equipment. The doors and windows of the work area should be closed to avoid the escape of silica dust. Ventilation and dust removal devices must be in good working order.

3. Precautions for inspection before work:

(1) The grinding wheel pressing nut shall not be loose;

(2) The grinding wheel must not have cracks and notches;

(3) The safety cover is fully assembled and reliable;

(4) The front and rear, up and down transmission handles are flexible to operate, and there is no noise during operation.